If your sonar feed isn’t displaying data, don’t worry–here’s a quick checklist to help you troubleshoot:

1. Check your connections - make sure the transducer is properly plugged into the Wi-Fi Router and that power is on.
2. Restart the system - Power cycle the router, and force close then reopen the app.
3. Update firmware and app - Outdated software can cause connection issues. 
4. Inspect the battery - Ensure it provides at least 6A of current and is within the 10-18V range. 
5. Confirm your network

• For Wi-Fi: Are you connected to the correct Accuphy_xxxx network?

If you’ve gone through these steps and it’s still not working, you may need to reset or reinstall the app–or contact Accuphy Support for further assistance.